Mk Series
The pinnacle of the Cubex Quads product line, the Mk-Series quads offer the ultimate in antenna performance and design.
These distinctive antennas are the result of nearly 70 years of quad design and manufacturing experience. For decades, Cubex Quads antennas have been providing BIG SIGNALS for demanding operators in locations all over the world. Our products continue to be the standard of quality and mechanical durability by which all others are compared.
While adhering to the original specifications, modern manufacturing practices and innovative ideas continue to improve on these superior designs.
Lower noise and massive gain on a shorter boom than comparable yagi designs, with excellent performance at lower elevations…
Go with “the choice of DX Kings”… go with Cubex Quads!


Kits include everything you need to construct a completed antenna, minus feed system or remote antenna switching unit.
Element wires are intentionally cut long to allow extra length for making terminations. Loop lengths are determined by pre-drilled holes in spreader arms. Simply lace the wires, pull taught and terminate. Full wave HF loops are very easy to make and will tune perfectly using our proven dimensions for each band with nice operational bandwidth.
A tuner typically isn’t required except of the upper end of the 10m band (typ. 3:1).
10/12 and 15m require a 75Ω matching section, whereas 17 and 20m can be direct fed with 50Ω coax. Pre-made match/patch cables can be found on the Parts and Accessories page.
See shipping information and cost savings solutions here.
Mk II
- 2-Element/3-Band (10/15/20m) Cubical Quad Antenna System
- 13ft Heavy-Duty Reinforced Fiberglass Spreader Arms
- Legendary Cubex CQS2.0 Hubs – 356-T6 Heat Treated Aluminum
- Heavy-Duty Boom-to-Mast Plate for 2″OD mast
- Complete Wire Element Set – 7-strand Hard Drawn Copper
- SS Worm Gear Spreader Arm Clamps
- 2″OD X 94″ 6061-T6 Aluminum Boom (1-piece)
- Durable Type1 PVC terminals, designed to far exceed legal limit power
SPECIFICATIONS (3-Band)
- Gain 7-9dbi
- F-B Ratio 20-30db
- Beam Width (hpp) 60deg
- Weight 52 pounds
- Boom Length 94″
- Turn Radius 10.1′
- Wind Load 5.5sq/ft
$1250
UPS Shippable
Include 12m/17m for $1395
SPECIFICATIONS (5-Band)
- Weight 55 pounds
- Wind Load 5.8sq/ft


Mk lll
- 3-Element/3-Band (10/15/20m) Cubical Quad Antenna System
- 13ft Heavy-Duty Reinforced Fiberglass Spreader Arms
- Legendary Cubex CQS3.0 Hubs – 356-T6 Heat Treated Aluminum
- Heavy-Duty Boom-to-Mast Plate with SS hardware for 2″OD mast
- Complete Wire Element Set – 7-strand Hard Drawn Copper
- SS Worm Gear Spreader Arm Clamps
- 3″OD X 18′ 6061-T6 Aluminum Boom (2-piece)
- Durable Type1 PVC Terminals, designed to far exceed legal limit power
SPECIFICATIONS (3-Band)
- Gain 10-12dbi
- F-B Ratio 25-30
- Beam Width (hpp) 55deg
- Weight 84 pounds
- Boom Length 18′
- Turn Radius 13′
- Wind Load 7.0sq/ft
$2245
Ships via Ground Freight
Include 12m/17m WARC for $2375
SPECIFICATIONS (5-Band)
- Weight 88 pounds
- Wind Load 7.4sq/ft
Mk IV
- 4-Element/3-Band (10/15/20m) Cubical Quad Antenna System
- 13ft Heavy-Duty Reinforced Fiberglass Spreader Arms
- Legendary Cubex CQS3.0 Hubs – 356-T6 Heat Treated Aluminum
- Heavy-Duty Boom-to-Mast Plate with SS hardware for 2″OD mast
- Complete Wire Element Set – 7-strand Hard Drawn Copper
- SS Worm Gear Spreader Arm Clamps
- 3″OD X 18′ 6061-T6 Aluminum Boom (2-piece)
- Durable Type1 PVC Terminals, designed to far exceed legal limit power
SPECIFICATIONS (3-Band)
- Gain 11-13dbi
- F-B Ratio 25-30
- Beam Width (hpp) 50deg
- Weight 107 pounds
- Boom Length 24′
- Turn Radius 14.5′
- Wind Load 10.5sq/ft
$2980
Ships via Ground Freight
Include 12m/17m for $3175
SPECIFICATIONS (5-Band)
- Weight 114 pounds
- Wind Load 11.1sq/ft

MONO Band and DUAL band models available. CALL for prices and availability.